Ikon Suspension's shock absorbers are made under an exclusive world-wide licence from Koni (Koni is a subsidiary of ITT). All Ikon Suspension's shock absorbers (shocks), springs, fork springs and progressive rate suspension for motor cycles and motor scooters use the same part numbers and naming conventions as the original Koni's with all of the parts being interchangeable with the last series of Koni Shocks as built by Koni. Many of the Ikon parts are made with tooling purchased from Koni and some parts are made by the same outside and third party suppliers who supplied Koni. Ikon Suspension the part data and specifications as supplied by Koni to make ALL of Ikon Suspension's shock absorber series (such as 76 series and 7610 series) and spare parts.

Koni was an icon in Motorbike and Motorscooter suspension, so we are determined to carry on that tradition as Ikon.

Bike on with Ikon©.

Ikon Ikon IkonI konI konI konI konI konI konI konI konI konI konI konI konI konI konI konI konI kon

All new light-weight Aluminium Body

Introducing 7614

The new 7614 series motor cycle shock absorber from Ikon Suspenion takes the best of the 7610 series features and adds a light weight aluminium body with a screw thread type pre-load adjustment for the spring and gas pressure just to top it off.

7614 has the same 4 position rebound damping adjustment feature found in 7610. This provides the rider with useful handling options ideal for road and track. The tradition of rebuildability and re-valveability continues in 7614. Many of the parts are interchangeable with 7610 which means the new series does not have to cost an arm and a leg and is economical to work with short and long term.

7614 has many potential applications. Almost all 7610 series shocks can be made as a 7614. Whether it be a street bike needing a high tech look, a vintage road racer, speedway rider or vintage motocrosser chasing the clock 7614 series shocks are there to provide affordable performance for all. 7614 has also found a useful place for a limited number of mono shock applications. In particular they have found ready acceptance on older K75, K100, K1100 and R series BMW’s.

As Ike says; Bike On With Ikon!